Sitemap Home Distributors About us Contact us
	Time Delay Relays Control Relays Three Phase Monitors General Purpose Relays Sockets
	Level Control Relays Ground Fault Monitors Protection Devices Interface Modules Hours Run Meters

Control Relays Current and voltage monitors both ac and dc controls circuits,pump and level control relays battery voltage under over protection, speed control, frequency monitor.

Most products carry recognised approvals including UL, CUL, CSA, VDE.....

To download the product specifications, click on the symbol or the product type number.

View product datasheet using Adobe Acrobat Reader

45 Series   DIN Rail Mtg

DIMS: (mm) H.78 W.45 D.99

Type No 45050 45051 45OVR 45UVR 45UCR 45OCR 45150 45UFR 45OFR 45TCR 45200 45175 45205 Function Over Voltage Under & Over Voltage Over Voltage Under Voltage Under Current Over Current Over Current Under Frequency Over Frequency PT100 Temperature Control Thermistor Under Speed Load Sharing   - - - - - - - - - (2 or 3-wire PT100 - DIN 43760) - - - Time Delay (from fault) 0.1-3S 0.1-10S ˜200mS ˜200mS 0.2-10S 0.2-10S 0.1-3S ˜200mS ˜200mS 200mS 50mS 0.5-30S/M 2S (to help)   - - - - - - 0.1-10S (on delay) - - - - - - Hysteresis 5-50% < 2% 1-15% 1-15% ˜5% ˜5% 5-50% 0.3-3Hz 0.3-3Hz 0.5 - 20% - - - Latch User Selectable No No No No No User Selectable No No No User Selectable User Selectable No Output SPDT Relay SPDT Relay DPDT Relay DPDT Relay DPDT Relay DPDT Relay SPDT Relay DPDT Relay DPDT Relay SPDT Relay, 0 - 10V* (Analogue) SPDT Relay SPDT Relay 2 x SPNO Relays Output Rating 10A @ 250VAC 10A @ 250VAC 8A @ 250VAC 8A @ 250VAC 6A @ 250VAC 6A @ 250VAC 10A @ 250VAC 8A @ 250VAC 8A @ 250VAC 8A @ 250VAC (Relay) 10A @ 250VAC 10A @ 250VAC 10A @ 250VAC Supply Voltage Un 24, 110, 230VAC 24/115/230VAC (selectable) 110, 230VAC 110, 230VAC 110, 230, 400VAC 110, 2320, 400VAC 24, 110, 230VAC 110, 230, 400VAC 110, 230, 400VAC 24V DC 24VDC & 24, 110, 230VAC 24, 110, 230VAC 24, 110, 230, 400VAC   - - - - - - - - - 24/110, 24/230V AC (Dual) - - - Integral Transformer Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes (not DC) Yes Yes Yes Monitoring Range Y2: 0.5-10VAC/DC Under trip 87-110% of Un 100-125% of Un 75-100% of Un 0-80% of 5A (In) 40-120% of 5A (In) Y2: 5-100mA AC/DC 40-60, 50-70Hz 40-60, 50-70Hz -50 to +300 deg C (5 ranges) - - -   Y3: 3-60VAC/DC Over trip 90-113% of Un - - - - Y3: 50mA-1A AC/DC - - - - - -   Y4: 30-600VAC/DC - - - - - Y4: 500mA-10A AC/DC - - * Analogue output relative to set point or measured temperature - - -

M1 Series   DIN Rail & Surface Mtg

DIMS: (mm) H.89 W.17.5 D.59

Type No M1CVR M1BVR M1IRT M1DRT M1MFR M1UVR M1TVR Function Under & Over Voltage Battery Voltage Alarm Mains Restoration Mains Restoration Mains Failure DC Under Voltage Under Voltage Timed   (Single phase) - Auto Restart (Interval) Auto Restart - - (Delayed Restart) Time Delay (from fault) 0.2 - 10S (adjustable) 1-30S - - ˜100mS - 100mS   (No delay if supply is <70% of Un) - - - - - - Hysteresis ˜2% of trip level ˜5% ˜5% ˜5% - - ˜2% Latch No No No No No - - Output SPDT Relay SPDT Relay SPDT Relay SPDT Relay SPDT Relay SPDT Relay SPDT Relay Output Rating 8A @ 250VAC (AC1) 8A @ 250VAC 8A @ 250VAC 8A @ 250VAC 8A @ 250VAC - - Supply Voltage Un 24, 110, 115, 220, 230, 240V AC 12 to 24VDC 24, 110, 115, 230VAC 24, 110, 115, 230VAC 110 to 230VAC 24, 48 VDC 220VAC   - - - - - - - Integral Transformer No No No No No - - Monitoring Range 70 - 130% of Un 75-125% of Un 80% of Un 80% of U 85-115% of U - -   Under adjustment: 75-95% of Un - (under voltage) (under voltage) (under voltage) - -   Over adjustment: 105-125% of Un - - - - - -

B1 Series   11 Pin Plug-In

DIMS: (mm) H.80 W.40 D.92

Type No B1UVR B1OVR B1CVR B1UCS B1OCS B1UFZ B1OFZ B1LR Function Under Voltage Over Voltage Under & Over Voltage Under Current Over Current Under Frequency Over Frequency Logic (Flip Flop)   - - - - - - - - Time Delay (from fault) ˜1S ˜1S 0.1-10S ˜1S ˜1S ˜1S ˜1S -   - - - - - - - - Hysteresis ˜1% ˜1% < 2% ˜1% ˜1% ˜1% ˜1% - Latch No No No No No No No - Output SPDT Relay SPDT Relay SPDT Relay SPDT Relay SPDT Relay SPDT Relay SPDT Relay DPDT Relay Output Rating 8A @ 250VAC 8A @ 250VAC 10A @ 250VAC 8A @ 250VAC 8A @ 250VAC 8A @ 250VAC 8A @ 250VAC 8A @ 250VAC Supply Voltage Un 12, 48VAC/DC, 24VDC 12, 48VAC/DC, 24VDC 24, 115, 230VAC 12, 48VAC/DC, 24VDC 12, 48VAC/DC, 24VDC 12, 48VAC/DC, 24VDC 12, 48VAC/DC, 24VDC 110, 240VAC   24, 110, 220/240VAC 24, 110, 220/240VAC - 24, 110, 220/240VAC 24, 110, 220/240VAC 24, 110, 220/240VAC 24, 110, 220/240VAC - Integral Transformer 110, 220/240V only 110, 220/240V only Yes 110, 220/240V only 110, 220/240V only 110, 220/240V only 110, 220/240V only Yes Monitoring Range 3.5-50V or 5-70VDC 3.5-50V or 5-70VDC Under: 83-98% of Un 4-20mA DC 4-20mA DC 35-70Hz 35-70Hz -   35-500VAC or 35-500VAC or Over: 102-117% of Un 0.35-5A AC 0.35-5A AC - - -   50-700VDC 50-700VDC - 0.5-7.5 DC 0.5-7.5 DC - - -

M3 Series   DIN Rail & Surface Mtg

DIMS: (mm) H.89 W.35 D.59

Type No M3CVR/2 M3MVR M3MCR M3LS2 M3LS3 M3VRC Function Under & Over Voltage Multi Function Multi Function Load Sharing Load Sharing DC Under & Over Voltage   (Single phase) Voltage Current (2 Control Contacts) (3 Control Contacts) - Time Delay (from fault) 0.2 - 10S (adjustable) 100mS or 1S 100mS or 1S <1Sec energise/de-energise <1Sec energise/de-energise -   (No delay if supply is <70% of Un) - - 2 Sec (to help) - - Hysteresis ˜2% of trip level 2% or 10% of set level 2% or 10% of set level - - - Latch No Switch Selectable Switch Selectable No No - Output DPDT Relay SPDT Relay SPDT Relay 2 x SPNO Relays 3 x SPNO Relays 2xDPNO Relay Output Rating 8A @ 250VAC (AC1) 8A @ 250VAC 8A @ 250VAC 5A @ 250VAC 5A @ 250VAC - Supply Voltage Un 24, 110, 115, 220, 230, 240V AC 18-240VAC, 12-240VDC 18-240VAC, 12-240VDC 24, 110, 230, 400V AC 24, 110, 230, 400V AC 24, 48VDC   - - - - - - Integral Transformer No Yes Yes Yes Yes - Monitoring Range 70-130% of Un 1. 1 to 26.5VAC/DC 1. 20mA to 500mA, AC/DC - - -   Under adjustment: 75-95% of Un 2. 10 to 265VAC/DC 2. 200mA to 5A AC/DC - - -   Over adjustment: 105-125% of Un Switch Selectable Switch Selectable - - -

70 Series   DIN Rail & Surface Mtg
DIMS: (mm) H.70 W.100 D.114	Type No 70CVR Function Under & Over Voltage   - Time Delay (from fault) 200mS   - Hysteresis 1-15% Latch No Output 2 x DPDT Relays Output Rating 8A @ 250VAC Supply Voltage Un 110, 230VAC   - Integral Transformer Yes Monitoring Range Under trip 75-100% of Un   Over trip 100-125% of Un   -

P48 Series   Panel Mtg / Plug-In

DIMS: (mm) H.48 W.48 D.103

Type No P48SRR P48SMP P48TR Function Shaft Rotation Shaft Rotation Tachometer   - - - Time Delay (from fault) 1-30, 2-60S 1-30, 2-60S -   - - - Hysteresis - - - Latch - - - Output SPDT Relay SPDT Relay SPDT Relay Output Rating 8A @ 250VAC 8A @ 250VAC 8A @ 250VAC Supply Voltage Un 24, 110, 220/240VAC 24, 110, 220/240VAC 110, 220/240VAC   - - - Integral Transformer Yes Yes Yes Monitoring Range - - 200-10, 000 rpm   - - -   - - -

D2TVR
DIMS: (mm) H.86 W.171 D.41	Type No D2TVR Function Under Voltage Timed   (Delayed Restart) Time Delay (from fault) 100mS   - Hysteresis ˜2% Latch - Output SPDT Relay Output Rating - Supply Voltage Un 220VAC   - Integral Transformer - Monitoring Range -   -   -

CT
	Type No CT Function Current Transformers   - Time Delay (from fault) -   - Hysteresis - Latch - Output 5A Secondary Output Rating - Supply Voltage Un -   - Integral Transformer - Monitoring Range CT10 (10/5A), CT60 (60/5A)   CT100 (100/5A), CT200 (200/5A)   CT400 (400/5A)

             

Join Sensor Products Newsletter   Order Now! Call: 941 778 0321

Site designed and maintained by WAM DESIGN